How Long Does Arc Eye Last? Healing Timeline and Care

Disclosure: This post contains affiliate links and I will be compensated if you make a purchase after clicking through my links. Learn More

How long does arc eye last? In most cases, arc eye lasts 24 to 48 hours, and the surface of the eye heals on its own with no lasting damage.

The tricky part is the delay. Symptoms usually show up 6 to 12 hours after the UV exposure, so many welders feel fine at quitting time and wake up at night with burning, watery eyes.

Most of the pain comes in the first night, and most people are back to normal by day 2. This is general safety information, not medical advice.

How Long Does Arc Eye Last? The Typical Timeline

Arc eye (also called welder’s flash or photokeratitis) usually clears within 1 to 2 days. The College of Optometrists says it “usually resolves within 24-48 hours,” and an NHS Wales patient leaflet gives the same healing window for the cornea.

StageTypical timingWhat you notice
Exposure0 hoursUsually nothing. You may not know you were flashed.
Onset6 to 12 hours later (sometimes sooner)Gritty, sand-in-the-eye pain, tearing, redness, light sensitivity
Worst phaseOften the first nightStrong pain, eyelid spasm, blurred vision, trouble keeping eyes open
Vision returnsAbout 18 hoursBlur fades and you can open your eyes more easily
Surface healed24 to 48 hoursPain and redness settle, eyes feel close to normal

All About Vision, a site reviewed by an optometrist, notes that symptoms can start as early as 30 minutes after a strong exposure, but up to 12 hours is common. So the clock for healing starts at the exposure, not at the first twinge of pain.

What Is Arc Eye?

Arc eye is a UV burn of the cornea, the clear front window of the eye. TWI, the UK welding institute, defines it as “an inflammation of the cornea, caused by ultraviolet radiation from the arc during welding.”

Video still explaining arc eye, the UV burn of the cornea that welders call welder flash

Credit: www.youtube.com

The UV damages the epithelium, the thin outer layer of cells on the cornea. Those cells slough off and leave nerve endings exposed, which is why it hurts so much. The NHS leaflet compares it to sunburn of the cornea and the conjunctiva, the thin membrane over the white of the eye.

The same injury happens from sun on snow (snow blindness), tanning beds and some lamps. In a shop, the usual causes are striking an arc before the helmet is down, a helmet lens that fails to darken, or standing near another welder without a screen.

Arc Eye Symptoms to Watch For

Symptoms usually hit both eyes at once, since both are usually exposed. Common signs listed by the College of Optometrists, NHS Wales and All About Vision:

  • Pain that feels like sand or grit in the eyes
  • Red, watery eyes and red, swollen eyelids
  • Strong sensitivity to light (photophobia)
  • Eyelid spasm, where the lids clamp shut
  • Blurred or reduced vision
  • Headache

Because the pain starts hours later, many people don’t link it to welding. If you welded, ground or stood near an arc that day and wake up with these symptoms, arc eye is the likely cause.

What Affects How Long Arc Eye Lasts

TWI notes that how bad the burn gets depends on the intensity of the UV and the length of exposure, and that UV intensity drops fast with distance from the arc. A longer or closer exposure means a deeper burn and a slower recovery.

  • Exposure time: a quick flash heals faster than minutes of unprotected welding.
  • Distance: the closer you were to the arc, the stronger the dose.
  • Repeat exposure: welding again before the cornea heals adds a new burn on top of the old one.
  • Contact lenses: All About Vision advises wearing glasses instead until the cornea is fully healed.

If your symptoms run past 48 hours or get worse instead of better, that no longer fits the normal pattern. Get your eyes checked.

How to Care for Arc Eye as It Heals

Arc eye usually gets better by itself. Care is about comfort and avoiding infection as the surface grows back. The College of Optometrists, NHS Wales and All About Vision point to these steps:

  • Rest your eyes. NHS Wales advises keeping the eyes closed and rested.
  • Use simple pain relief such as acetaminophen (paracetamol), following the label dose.
  • See a doctor for drops. A doctor may prescribe lubricating drops or an antibiotic ointment to help prevent infection as the cornea heals.
  • Switch to glasses until the eye has fully healed if you wear contacts.
  • Skip home remedies. All About Vision warns against unverified online remedies for any eye condition.

Stay off the welder until your eyes feel normal again. A second exposure on a healing cornea can stretch a 1-day problem into several days.

When to See a Doctor

Book an eye exam if you think you have arc eye, especially the first time. TWI recommends medical advice because grinding or chipping slag can also leave a foreign body in the eye, and that needs to be removed.

Get urgent eye care if you notice:

  • Sudden changes in vision, such as blurred or double vision (All About Vision)
  • Pain that keeps getting worse after the first night
  • Symptoms that are not clearly better after 48 hours
  • A chance that metal, slag or grit hit your eye

Can Arc Eye Cause Permanent Damage?

Usually no. The College of Optometrists says “the condition gets better by itself and there is usually no permanent damage.” The NHS leaflet adds that the corneal surface usually heals with no long-term complications within 24 to 48 hours.

That is for a single, normal episode. Repeat burns, an infection, or a foreign body left in the eye are different problems, which is why an exam matters when symptoms don’t follow the usual pattern.

How to Prevent Arc Eye Next Time

Prevention comes down to blocking UV before it reaches your eyes. Pick the right filter from a welding shade number chart, keep your helmet down before you strike, and test the lens before each job.

  • Use the correct filter shade for your process and amperage.
  • Check that an auto-darkening lens darkens on every strike.
  • Wear safety glasses under the helmet for grinding and chipping.
  • Use welding screens so people nearby are shielded. TWI advises that people should not be within 10 meters (about 33 feet) of an arc without screening or eye protection.
Welding gear shown in a video on how to prevent arc eye and flash burn

Credit: www.youtube.com

Safety note: UV from a welding arc also burns skin. Cover your neck and arms, and never look at an arc, even from across the shop, without a proper filter.

Frequently Asked Questions

How long does arc eye take to show up?

Arc eye symptoms usually show up 6 to 12 hours after the UV exposure. A strong flash can cause symptoms in as little as 30 minutes. This delay is why many welders feel fine after a shift and then wake up at night with painful eyes.

Can arc eye go away in a few hours?

Mild arc eye can start to ease within a day, but the cornea usually needs 24 to 48 hours to heal. Vision often clears in about 18 hours. Pain that fades quickly is a good sign, but rest your eyes until they feel fully normal again.

Should I go to the ER for arc eye?

Go for urgent care if your vision changes suddenly, the pain keeps getting worse, or something may have hit your eye. Most arc eye cases need a regular eye exam rather than the ER, but a doctor should check your eyes, especially the first time.

Can you get arc eye from watching someone weld?

Yes. Bystanders get arc eye too, because UV from the arc travels across the shop. TWI advises that people should not stand within 10 meters of an arc without a screen or eye protection. Screens protect helpers and anyone walking past.

Can I weld again with arc eye?

Wait until your eyes feel completely normal before you weld again. A new exposure on a healing cornea adds a second burn and makes recovery take longer. Check your helmet lens and filter shade first, so the same problem does not happen again.

Final Words

Arc eye hurts, but it is usually short. Expect symptoms 6 to 12 hours after exposure and most of the healing within 24 to 48 hours, with no lasting damage in a normal case.

Rest your eyes, use simple pain relief, wear glasses instead of contacts, and see an eye doctor for drops and a foreign body check. If symptoms run past 2 days or your vision changes suddenly, get urgent care.

Then fix the cause: the right shade, a working lens, and screens for anyone nearby.

Scroll to Top