Disclosure: This post contains affiliate links and I will be compensated if you make a purchase after clicking through my links. Learn More
In the 1/1/1/1 vs 1/1/1/2 welding helmet choice, a 1/1/1/1 lens scores best in all 4 EN 379 tests, and a 1/1/1/2 lens gives up one class only in the angle test. For most bench and flat work you won’t notice the gap, but out-of-position welders who look through the lens at sharp angles may.
Both codes come from the European standard EN 379 for auto-darkening welding filters. Each number is a class from 1 to 3, and 1 is the best score.
The code is a clarity grade, separate from the US safety standard. Miller says OSHA only requires and uses the ANSI standard, so check for ANSI Z87.1 on any helmet you buy in the US.
1/1/1/1 vs 1/1/1/2 Welding Helmet at a Glance
Both codes match on 3 of the 4 EN 379 tests. Only the angle test differs, where 1/1/1/1 scores class 1 and 1/1/1/2 scores class 2.
| Feature | 1/1/1/1 | 1/1/1/2 |
|---|---|---|
| Optical class (distortion) | Class 1 | Class 1 |
| Diffusion of light (blur) | Class 1 | Class 1 |
| Variation in luminous transmittance (even shade) | Class 1 | Class 1 |
| Angle dependence (shade at an angle) | Class 1 | Class 2 |
| Where you notice it | Every viewing angle | Mostly at sharp viewing angles |
| Example | Lincoln Electric VIKING 1840, 2450 and 3350 series cartridges (per a 2014 Lincoln sheet) | Miller ClearLight lens on Digital Elite, Digital Infinity and T94 helmets |
What Do the 4 Numbers in an EN 379 Rating Mean?
The EN 379 code always lists the same 4 tests in the same order. Lincoln Electric, Miller and The Fabricator all describe the grades this way.
- 1st number, optical class: how much the lens distorts the image, like looking through rippled glass.
- 2nd number, diffusion of light: how blurry or hazy the view is from impurities in the lens.
- 3rd number, variation in luminous transmittance: how even the shade is across the whole lens.
- 4th number, angle dependence: how well the shade stays the same when you look through the lens at an angle.
Each test is graded 1, 2 or 3. A 1/1/1/1 helmet scored class 1 on all 4, and other combinations exist too, like the 1/1/2/2 rating on the optrel weldcap spec sheet.
What Is a 1/1/1/1 Welding Helmet?
A 1/1/1/1 welding helmet has an auto-darkening filter that scored the top class in all 4 EN 379 tests. You get low distortion, low haze, an even shade and a steady shade at an angle.
Lincoln Electric’s 2014 VIKING sheet lists its 1840, 2450 and 3350 series cartridges with a 1/1/1/1 rating.
What Is a 1/1/1/2 Welding Helmet?
A 1/1/1/2 welding helmet matches the 1/1/1/1 score on the first 3 tests and drops to class 2 on angle dependence. Straight on, the view is graded the same.
Miller’s ClearLight lens carries a 1/1/1/2 rating, according to its 2021 helmet spec sheet. Miller lists it on Classic VS, Digital Performance, Digital Elite, Digital Infinity and T94 series helmets, and those helmets meet ANSI Z87.1+ and CSA Z94.3.

Credit: www.youtube.com
Key Differences Between 1/1/1/1 and 1/1/1/2
Angle Dependence
The only graded difference is the 4th number. The Fabricator says that on a lower-rated lens, the shade often darkens when you look through it at an angle.
Miller says the 4th rating only applies at extreme viewing angles. So a class 2 here shows up when you weld overhead, around a pipe, or with your head tilted to see the puddle.
Straight-On Clarity
Looking straight through the lens, both codes score class 1 for distortion, haze and shade evenness. Miller calls the first 3 numbers the most important for welders.
Light State and Color
The EN 379 code does not grade the light state or color tint. Miller’s spec sheet lists ClearLight with a brighter 3.0 light state, and that number sits outside the 4-digit code.
Miller also claims a 1/1/1/2 ClearLight lens can have 4x better clarity benchmarked under Z87.1 than leading 1/1/1/1 helmets. Treat that as a maker’s claim, since it is not an independent test.

Credit: www.youtube.com
Safety Standards
A clarity code is a comfort and vision grade. For US job sites, look for ANSI Z87.1 on the shell and filter, since Miller notes OSHA uses the ANSI standard.
Where Each One Fits
- Flat and horizontal bench work: Either rating works, because you look mostly straight through the lens.
- Out-of-position and pipe welding: A 1/1/1/1 lens keeps the shade more even when you look sideways or up.
- Long shifts: Test both in person if you can, since light state and color affect eye fatigue and sit outside the code.
- US job sites: Pick a helmet that meets ANSI Z87.1 first, then compare clarity codes.
Which One Should You Choose?
Choose a 1/1/1/1 Helmet If
- You weld overhead, vertical or around pipe and look through the lens at sharp angles.
- You want the top grade on every EN 379 test.
- You switch between many positions in one job.
Choose a 1/1/1/2 Helmet If
- Most of your work is flat or horizontal at a bench.
- You like a specific lens, light state or color tint that carries this rating.
- The helmet meets ANSI Z87.1 and fits your head and budget better.
Frequently Asked Questions
Is a 1/1/1/2 welding helmet safe?
Yes, when it meets the safety standard for your area, such as ANSI Z87.1 in the US. The 4-number EN 379 code grades clarity only. Miller lists its 1/1/1/2 ClearLight helmets as meeting ANSI Z87.1+ and CSA Z94.3, so check the label on any helmet.
What does 1/1/1/1 mean on a welding helmet?
It means the auto-darkening filter scored class 1, the best grade, in all 4 EN 379 tests. Those tests cover optical distortion, light diffusion, shade evenness across the lens, and how steady the shade stays when you look through it at an angle.
Can you see the difference between 1/1/1/1 and 1/1/1/2?
Straight on, both grade the same. The difference shows at sharp viewing angles, where a class 2 lens may look a little darker. Miller says the 4th rating only applies at extreme angles, so flat bench welders often won’t notice it.
Is 1/1/1/1 the best welding helmet rating?
It is the top score on the EN 379 clarity code. The code does not grade light state, color tint, reaction time or comfort. Compare those features too, and make sure the helmet meets ANSI Z87.1 if you work in the US.
Does ANSI Z87.1 use the 1/1/1/1 rating?
No. The 4-number code comes from the European standard EN 379. Miller notes that EN ratings are separate from required ANSI ratings and that OSHA only uses the ANSI standard, so a US helmet label may show both codes or only ANSI Z87.1.
Final Words
A 1/1/1/1 helmet tops every EN 379 test, and a 1/1/1/2 helmet matches it except at sharp viewing angles. For bench work, both give you the same straight-on grade.
If you weld out of position often, the 1/1/1/1 lens is the better pick for an even shade. Either way, check for ANSI Z87.1 and try the helmet on before you buy.


