What Is a Pancake Welding Hood? Why Pipeliners Use It

Disclosure: This post contains affiliate links and I will be compensated if you make a purchase after clicking through my links. Learn More

What is a pancake welding hood? It’s a round, flat welding hood with a small lens box that pipeline welders wear to block glare and get close to the joint. The name comes from the shape, which Primeweld describes as round and flat, like a pancake.

Most pancake hoods hold a 2×4 lens inside a balsa wood box that sits around your eyes. A single side shield blocks light from one side, and a strap holds the hood on your head.

What Is a Pancake Welding Hood?

A pancake welding hood is a lightweight, flat-faced welding hood built for pipeline work. It holds a filter lens in a small balsa box close to your eyes and leaves the back and most of the sides of your head open to air.

Outlaw Leather says the flat face lets your face sit as close to the weld as possible. That matters in a pipe ditch, where you often weld around a joint in tight, awkward spots.

Parts of a Pancake Hood

Every pancake hood has the same basic parts. The materials and finish change from brand to brand.

The Shell

The shell is the round, flat disc in front of your face. Primeweld describes older hoods made from thin metal and balsa wood. Current models from Pipeliners Cloud and Outlaw Leather use carbon fiber or fiberglass.

The Balsa Lens Box

Inside the shell, a balsa wood box surrounds your eyes and holds the lens. Pipeliners Cloud uses a molded balsa box with a quick-change system, so you can swap the box without replacing the hood.

You sand the balsa to match the shape of your face. A good fit stops light from leaking in around your eyes.

The Lens

Pipeliners Cloud says its UNO pancake takes a 2×4 lens with a 1/2 inch opening. It accepts passive shade lenses, auto-darkening lenses and cheater (magnifying) lenses. Pick the shade with a welding shade number chart for your process and amperage.

The Side Shield and Strap

A single side shield sits on the side opposite your welding hand. That is why pancake hoods come in right-handed and left-handed versions. An adjustable strap goes around your head, and many welders wear a welding cap under it.

Pipeline welder wearing a pancake welding hood with the side shield on one side

Credit: www.youtube.com

Why Pipeline Welders Use Pancake Hoods

Pipeliners pick a pancake hood for comfort and access on long days outdoors. The makers and sellers list the same main reasons.

  • Light weight: Pipeliners Cloud lists its UNO at about 10 oz, or about 12.5 oz with the strap and balsa box. Primeweld says a standard pipeline helmet can weigh up to twice as much.
  • Less glare from behind: The close lens box blocks sun and backlight that can bounce inside a standard helmet.
  • Cooler air flow: The open back and sides let air move, which helps on hot days in the ditch.
  • Close access: The flat face lets you get your eyes close to the root and hot pass on a pipe joint.
  • Custom fit: Sanding the balsa box gives each welder a hood shaped to their own face.

Pancake Hood vs Standard Welding Helmet

A pancake hood and a full welding helmet solve different problems. This comparison uses the maker claims from Pipeliners Cloud, Outlaw Leather and Primeweld.

FeaturePancake HoodStandard Welding Helmet
ShapeRound, flat face with a small lens boxFull shell around the face, sides and top
Lens sizeUsually 2×4Larger auto-darkening cartridges on most models
WeightAbout 10 to 12.5 oz (Pipeliners Cloud UNO)Up to twice a pancake (Primeweld)
Air flowOpen back and sidesEnclosed shell
Neck and side coverOne side shield onlyFull cover
FitSanded balsa box for a custom fitRatchet headgear
Best forPipeline and field weldingShop, fab and general welding

Downsides and Safety Limits

A pancake hood gives up cover to save weight. Know these limits before you wear one.

  • No grinding protection: Pipeliners Cloud warns its hood will not protect against fragments from a broken grinding wheel.
  • Limited impact cover: The same maker says the hood is not built to stop severe impacts from the top or sides.
  • Open neck and one open side: Sparks and UV can reach skin that a full helmet would cover, so wear a welding jacket and cap.
  • Not always ANSI certified: Pipeliners Cloud says its UNO is not ANSI certified. Primeweld lists other pancake hoods labeled ANSI Z87.1 approved.
  • Carbon fiber conducts electricity: Pipeliners Cloud warns that carbon fiber conducts, so keep the hood away from the electrode and ground.

Safety note: Pipeliners Cloud tells users to wear Z87.1 safety glasses under the hood at all times. Put your grinding face shield on for grinding, and never weld with a cracked or loose filter lens.

Types of Pancake Hoods

Fiberglass Pancake Hoods

Fiberglass hoods are the common entry point. Outlaw Leather sells fiberglass pancakes alongside its carbon fiber line, usually at a lower price.

Carbon Fiber Pancake Hoods

Carbon fiber hoods are the light, stiff option. Pipeliners Cloud builds its UNO as a one-piece carbon fiber shell, and Outlaw Leather sells several carbon fiber designs.

Flip-Up Pancake Hoods

Most pancakes have a fixed lens. Outlaw Leather also sells flip-up carbon fiber pancakes, so you can lift the lens to check fit-up without taking the hood off.

Sanding the balsa box of a new carbon fiber pancake welding hood to fit the face

Credit: www.youtube.com

How to Choose a Pancake Welding Hood

  • Pick your hand: Order the right-handed or left-handed version so the side shield sits away from your welding hand.
  • Check the lens size: Confirm the box takes a 2×4 lens, and check whether your auto-darkening lens fits.
  • Read the safety label: Look for ANSI Z87.1 marking if your job site requires it.
  • Choose the material: Fiberglass costs less. Carbon fiber is lighter but conducts electricity.
  • Plan for fitting: Expect to sand the balsa box before the first day of use.

Frequently Asked Questions

Why Do Pipeline Welders Use Pancake Hoods?

Pipeline welders use pancake hoods because they are light, open at the sides and back, and cut glare from the sun behind the welder. The flat face lets you get close to the joint in a ditch, and the balsa box can be sanded for a snug custom fit.

Can You Put an Auto-Darkening Lens in a Pancake Hood?

Yes, many pancake hoods take a 2×4 auto-darkening lens. Pipeliners Cloud says its UNO hood fits any auto lens and cheater lenses. Check the lens box size first, because most pancakes are built around the 2×4 format, and a larger cartridge will not fit.

Are Pancake Welding Hoods ANSI Approved?

Some are and some are not. Primeweld lists pancake hoods labeled ANSI Z87.1 approved, and Pipeliners Cloud says its UNO hood is not ANSI certified yet. Read the label before you buy, and always wear Z87.1 safety glasses under any pancake hood you use.

How Do You Fit a Pancake Hood to Your Face?

You fit a pancake hood by sanding the balsa lens box until it sits flat and even around your eyes. Sand a little at a time, try it on, and stop when no light leaks in around the box. Then set the strap so the hood stays put.

Is a Pancake Hood Good for Beginners?

A pancake hood is usually a poor first hood for a beginner. It leaves your neck and the sides of your face open, takes time to fit, and does not guard against grinding wheel fragments. Start with a full auto-darkening helmet and add a pancake later.

Final Words

A pancake welding hood is a light, flat pipeliner hood with a balsa lens box, a 2×4 lens and one side shield. It trades full cover for less weight, less glare and better access on pipe joints.

If you weld pipe outdoors, a fitted pancake can make long days easier. Wear Z87.1 safety glasses under it, use a face shield for grinding, and keep a full helmet for shop work.

Scroll to Top